Powder production line equipment

Powder production line equipment is the dusting chamber body, the pulse filter element recovery device and the manual electrostatic spraying main machine. The filter element recovery system has the advantages of large filter area, high recovery rate, high powder utilization rate, small footprint and simple installation. The powder-containing air in the powder chamber is attracted by the recovery fan and enters the recovery system by the side inlet. Under the action of the air flow, the dust-containing air passes through the micro-mesh filter cylinder evenly, while the fine dust powder is blocked on the outer surface of the filter cylinder. As the dust layer on the outer surface of the filter cylinder thickens and the resistance increases, the timer of the control system will act on the solenoid valve system to open the air diaphragm valve. So the high pressure air is directly into the filter cylinder, the air flow from inside to outside on the surface of the solenoid valve powder, so that the dust adsorbed on the surface of the filter element is blown clean, the dust with the main air flow down and gravity into the powder bucket, further purify the discharged air, so that the final discharged air to achieve the purpose of complete purification, optimize the working environment, It has the advantages of improving economic efficiency and high recycling rate.

Description of the structure of the dusting chamber

1, the automatic powder gun adopts electrostatic type, so that the spray powder has static electricity.

2. 1.5mm cold-rolled steel plate and section steel are used in the room.

3. Bending joint welding is used between the outdoor body plate and the plate.

4, the surface of the chamber is smooth and clean, the sealant is injected between the plates, the powder is convenient, and the color is easy to change.

5, flat top of the chamber, reduce the opening area, prevent dust spillover, protect the hanger.

6, the recovery of wind mouth, side air extraction technology, so that the air in the spray room reasonable organization, soft wind, increase the powder in the spray room air retention time to improve the powder rate. The recovery system has low load, high efficiency and long life.

7, each operation port is equipped with independent top explosion-proof lighting, internal light is sufficient, safe and energy saving, and easy maintenance.

8. The distance between the workpiece and the workpiece around the door opening is adjustable.

Product detail description

The automatic powder gun is electrostatic, so that the powder sprayed out has static electricity.

Product characteristics

The up and down reciprocating powder spraying several strokes 1500, the reciprocating motion accuracy is ±2mm, the movement speed is 0-6m/min.

95% recycled powder filter element is adopted to increase the secondary utilization of powder.

Pulsed spray gas device is used to automatically remove powder from filter element, which can reduce the powder changing machine by 50%.

Screen out useless powder to ensure the cleanliness of the powder for secondary use.

Scope of application: hardware, aluminum products, sheet metal, auto parts, etc.